Hardware  - High-performance array IMU  - Factory-calibrated with temperature compensation from -40 to 85℃, with scale factor, cross-axis, and zero bias calibrated - The gyroscope zero-bias instability is as high as 2.5°/h - The zero bias instability of the accelerometer is as high as 30ug - Multiple interfaces such as UART (TTL)/CAN - Integrated Temperature Sensor - Small surface-mount package, easy to integrate - RoHS and CE certification - Full-constellation, full-frequency RTK-GNSS system, dual-antenna direction finding Software - Adaptive extended Kalman fusion algorithm, capable of up to 100Hz output with low latency - Dual-antenna directional 0.2° 1m baseline - It has excellent suppression effect on linear acceleration - Timing accuracy of 20ns - Single-point positioning with an accuracy of 1.5 meters - RTK positioning accuracy is 1cm - Speed accuracy: 0.03m/s - Cold start time < 30s - Hot start time < 2s - Supports multiple protocols such as binary, NMEA, J1939, and more - Rich user configuration instructions - Multi-functional GUI, easy to operate - Supports multiple routines such as ROS and C  

The I5000 contains a high-precision GNSS module and a factory calibrated IMU, so that it could continuously provide high-precision information on position, velocity, and attitude at high frequency. Even in challenging conditions such as urban canyons, shaded areas, and tunnels, The I5000 will also keep available and self-evaluated reliability by empowered with several algorithms such as multi-source Kalman filter.    Product Features ⚪ Support full-system multi-frequency points of BDS, GPS, GLONASS, Galileo and QZSS, and support the Beidou-3 satellite system ⚪ IMUs have calibrated in factory ⚪ Adaptive static/dynamic alignment ⚪ Configurable universal vehicle motion information (such as ODM) interface ⚪ Adaptive compensation for system installation errors and ODM scale errors ⚪ The horizontal position accuracy can be within 0.2%×D with GNSS outage①     Application  ⚪ Autonomous driving ⚪ Platform stability and control ⚪ Automated machinery ⚪ Robot control  

The I6000 is a module - level MEMS integrated navigation system independently developed by Lins Technology. It incorporates a MEMS IMU (Inertial Measurement Unit) and a high - precision dual - antenna GNSS. Utilizing a multi - source Kalman filter fusion algorithm, it can provide continuous and reliable high - precision positioning and navigation information in complex environments. The product is widely applied in fields such as s6atellite communication, drones, surveying and mapping, and intelligent driving.      Product Features ⚪ Support full-system multi-frequency points of BDS, GPS, GLONASS, Galileo and QZSS, and support the Beidou-3 satellite system ⚪ IMUs have calibrated in factory ⚪ Adaptive static/dynamic alignment ⚪ Configurable universal vehicle motion information (such as ODM) interface ⚪ Adaptive compensation for system installation errors and ODM scale errors ⚪ The horizontal position accuracy can be within 0.2%×D with GNSS outage① ⚪ Up to 32GB internal storage(optional)   Application  ⚪ Autonomous driving ⚪ Platform stability and control ⚪ Automated machinery ⚪ Robot control  

This is the article for IF4010 related specific technical requirements for the FOG-40 type inertial measurement unit, which type of inertial measurement unit can be widely used in vehicle mounted, shipborne, airborne and other fields.

The core inertial sensor of the IR3000 laser gyro inertial navigation system is composed of a three-axis 70-type laser gyro combined with a three-axis quartz flexible accelerometer. It mainly includes: secondary power supply, navigation computer, current-frequency conversion circuit, gyro control board, gyroscope, accelerometer, and mechanical structure. Its main functions are: -       It can provide real-time information such as position, heading, horizontal attitude, speed, angular velocity, etc; -       With effective guidance information, initial alignment can be completed while moving; -       It has self-checking and data storage functions; -       The coordinate system can be aligned with other devices through parameter setting.

The core inertial sensor of the IR2000 laser gyro inertial navigation system is composed of a three-axis 50-type laser gyro combined with a three-axis quartz flexible accelerometer. It mainly includes: secondary power supply, navigation computer, current-frequency conversion circuit, gyro control board, gyroscope, accelerometer, and mechanical structure. Its main functions are: -       It can provide real-time information such as position, heading, horizontal attitude, speed, angular velocity, etc; -       With effective guidance information, initial alignment can be completed while moving; -       It has self-checking and data storage functions; -       The coordinate system can be aligned with other devices through parameter setting.

The core inertial sensor of the IR1000 laser gyro inertial navigation system is composed of a three-axis 30-type laser gyro combined with a three-axis quartz flexible accelerometer. It mainly includes: secondary power supply, navigation computer, current-frequency conversion circuit, gyro control board, gyroscope, accelerometer, and mechanical structure. Its main functions are: -       It can provide real-time information such as position, heading, horizontal attitude, speed, angular velocity, etc; -       With effective guidance information, initial alignment can be completed while moving; -       It has self-checking and data storage functions; -       The coordinate system can be aligned with other devices through parameter setting.

I4500 integrated navigation system has built-in high-performance MEMS gyroscope and accelerometer, which can receive external GNSS data, realize multi-sensor fusion and integrated navigation algorithm, and have short-term inertial navigation capability when GNSS is invalid. The product has high reliability and strong environmental adaptability. By matching different software, the products can be widely used in the fields of tactical and industrial unmanned aerial vehicles, unmanned vehicles, unmanned ships, aviation guided bombs, intelligent ammunition, rockets, mobile communication, mapping, seeker and stable platform. The product is divided into low-configuration version (I4500-A) and high-configuration version (I4500-B). The two products have different precision and price, which is convenient for users to choose based on specific use conditions.

This product has built-in three-axis integrated high-precision fiber optic gyroscope, three-axis high-precision quartz flexible accelerometer and mobile surveying-level multi-mode multi-frequency GNSS receiver supporting autonomous Beidou function. Through advanced intelligent combined navigation algorithm and Kalman filter, it is optimized for GNSS occlusion and multipath interference, and can achieve high-precision heading, attitude, speed and position measurement of moving carriers. This inertial navigation system also has multiple sensor interfaces such as GNSS/odometer/DVL/barometric altimeter, which can well meet the long-term, high-precision and high-reliability navigation application requirements in complex environments such as urban canyons, and can be used for navigation and control of various unmanned systems. Product features include: fast and accurate determination of initial heading and attitude, support for real-time heading and attitude output, built-in GPS and Beidou dual-mode receiver, support for dynamic fast alignment, INS/GNSS combination integrated design, support for IE post-processing, enhanced Kalman filter algorithm, and resistance to electromagnetic interference and vibration. It can be used in vehicle-mounted, airborne, ship navigation, stability control and other fields.

This product is equipped with a high-precision closed-loop fiber optic gyroscope with a full temperature of 0.001 °/h and a 10ug high-precision quartz accelerometer. It uses multi-sensor data fusion technology to combine inertial measurement with GNSS, enabling long-term high-precision integrated navigation.  The product also has post-processing function, which can be used to improve the heading, attitude, and position accuracy of the product through post-processing software.

IF3700 использует высокоточный замкнутый контур. оптоволоконный гироскоп при полной температуре 0,01°/ч и 20 μg высокоточный кварцевый акселерометр, который может обеспечить высокоточное измерение чистой инерционной ориентации. Он имеет автономную функцию компаса и может сохранять точность ориентации и курса в течение длительного времени без посторонней помощи. Он может использоваться в качестве основного навигационного оборудования для крупных беспилотных летательных аппаратов, беспилотных кораблей и беспилотных подводных лодок и широко используется в смежных областях, таких как авиация, аэрокосмическая промышленность и навигация.

IF3500 — это собственная разработка волоконно-оптическая инерциальная навигационная система с небольшим размером и высокой точностью, что позволяет достичь самоопределения севера с точностью до 0,1.°. Система состоит из оптоволоконного гироскопа со стабильностью нулевого смещения 0,015.°/h, высокоточный кварцевый акселерометр и полносистемный многочастотный спутниковый модуль, поддерживающий функцию Beidou. Этот продукт может независимо искать северную навигацию, а также поддерживает комбинации одной и двух антенн. Оснащен превосходными алгоритмами навигации, оптимизированными для спутниковой окклюзии, многолучевых помех и других ситуаций.